Commercial

Battens, troffers, low brightness, diffuser and reflector systems for all of your commercial applications.

<< Back

> Home > Commercial > Fluorescent - Battens > TWIST

TWIST

PDF Project Writer PDF Brochure Email for more questions Email this page

Converts conventional 36 watt T8 fluorescent luminaires into an energy efficient 28 watt T5 circuit.


Features

  • Converts conventional interior 36 watt T8
fluorescent luminaires with a standard magnetic
ballast into an energy efficient 28 watt T5 circuit
  • Complies AS/NZS61347.2.3 Australian / NZ Standards
  • In excess of 15% energy savings are gained by a simple twist*
  • A choice of bare or high performance reflector models are available
  • The system is supplied complete with a quality 10 000hr average rated life T5 energy saving lamp
  • A choice of lamp colours 4000k or 6500K are available
  • Reliable and efficient non-flicker starting characteristics
  • Easy low power factor circuit installation*
  • Supplied with circuit fuse for installation and maintenance safety


Applications

School's, universities, TAFE's commercial facilities, service area's where a cost effective T5 energy efficient solution is required.  
 
 
Product Codes Dim Mass
Code Version (mm) (kg)
c/w 4000K lamp
TW128B4 28W T5 bare 1215 x 23 x 37 0.30
TW128R4 28W T5 reflector 1215 x 45 x 37 0.35
c/w 6500K lamp
TW128B6 28W T5 bare 1215 x 23 x 37 0.35
TW128R6 28W T5 reflector 1215 x 45 x 37 0.35
Note - Add to technical Installation guidelines: * Designed for interior ceiling mounting * Twist (adaptor) is double insulated, installed fluorescent luminaire must be installed in accordance with AS3000. * The existing lumiaire fluorescent starter is not required and should be removed from the circuit, the remaining starter socket opening should then sealed in accordance with AS3000 requirements. * *Power factor of 0.4uF is achieved when installed in a standard HPF luminaire. Subject to local electrical regulations, the optimal combined (Twist) adaptor and luminaire power factor of 0.98uF is achieved when the luminaire supply capacitor is removed. * Input supply voltage (at the point of the terminal block) of the installed luminaire is 240 V / 50Hz Technical notes: * Not suitable for dimming * For twin T5 lamp cicuits and for optimal lamp performance, align the lamp identification markings together (at the same end of the luminaire). * Only suitable for luminaires with approved twist lock T8 lamp holders
 
IP20 max
mass
0.35		 max dim (mm)
 TA 25°C